Elastics

An elastic is an inter-arch band the patient hooks between the upper and lower arches to help move the teeth. When you select a placed elastic in the Attachments step, its own panel opens: the elastic's measured distance and perimeter, a suggested size and forces, its aligner range, and the delete tool. What elastics are for clinically is covered in the elastics manual; this page is about running the panel.

Open it

In the 3D View, go to the Attachments step and click a placed elastic. The Elastic panel follows the selected elastic.

Measures and suggested size

At the top the panel shows the elastic's current Distance and Perimeter in millimetres.

Suggested elastic shows the size that best fits the current distance, with the typical Light, Medium and Heavy forces in ounces and newtons. This is a guide only — it comes from the current distance, it is not a prescription, and nothing is saved.

Range

Set the aligner Range the elastic is present for with the start and end fields, or by dragging the range slider.

Delete

Delete removes the elastic. You can also press the Delete key, unless you are typing in a field.

Good to know

  • The controls are greyed out without the treatment-edit permission.
  • The elastic becomes part of the treatment and is carried into the printing phases with the attachments.

Related topics